Mopar Stroker 408 Edlebrock Heads

$4595

Here is our Aluminum Headed street/strip motor. Excellent for the Saturday night cruise and occasional trip to the strip. Has a solid lope to it and it will be heard. If matched up to 1.75" headers, 750+ carb, we say it's 430hp to be safe but 450+hp is a better number when given a good tune. With the extra stroke 460+ lbs of torque are available. Best when used with 3.55 or higher gears and a 2500 rpm stall on automatics. Stout HP and Torque. Big Block power in a small block package.

Block:

* Seasoned 360 block
* Thermal cleaned and stress relieved
* Square and parallel decked
* Bore and Honed

Rotating assembly:

* New SCAT cast steel crankshaft
* Hi-Performance hypereutectic pistons
* Scat I Beam Rods
* Hastings moly rings
* Balanced rotating assembly
* Melling high-volume oil pump
* Flat tappet hydraulic lifter camshaft, solid is available
* 3000-6000 rpm, 232* intake, 240* exhaust, .532 lift (E420135)
* Heavy-duty, double-roller timing set

Cylinder heads:

* Edlebrock Performer RPM Aluminum Heads
* 171cc intake ports, 63cc chambers
* Roller rocker arms
* Hardened retainers and springs
* 2.02 in. swirl-polished intake valves
* 1.6 in. swirl-polished exhaust valves
* Hardened pushrods
* Brass freeze plugs

Intake

* Professional Products RPM air-gap intake